Binding Wheel

SKU:
$25.00
$25.00
Unavailable
per item

Roll up your binding and easily dispense it while you sew!


Organize your folded binding with the Binding Wheel.  It allows you to easily roll up your folded binding while you are ironing.  Set the Binding Wheel next to your sewing machine and the binding will easily roll off as you attach it to your project.

Holds enough binding for a king sized quilt (the photo to the right shows 520" on the Binding Wheel).

Improved design and stronger material passes repeated "drop tests".  
​New Sizes and More Colors and a Wheel Clamp are now Available!
​
By customer request we now offer additional widths of Binding Wheels:
  • 1 1/4" original slot size (for 2 1/2" binding folded in half)
  • 1 1/2" slot (for 3" binding folded in half)
  • 1 3/4" slot (for 3 1/2" binding folded in half)
  • 2" slot (for 4" binding folded in half)

Each binding wheel is now marked in the center with the size of the slot so you can easily tell them apart.
To use the Binding Wheel:

1)  Fold and iron your 2 1/2" (or smaller) fabric strips in half.  (Use a Third Hand Binding Tool to make the job easier!)

2)  Place the folded edge of your binding under one of the rounded supports on the wheel as pictured.  This will help guide your fabric and will also apply a little pressure to help it roll onto the wheel smoothly.

3)  Thread the fabric through the slot in the center and pull about 1 1/2-2" through as pictured.  This will hold the end of the binding as you turn the wheel.

4)  Turn the wheel to roll the binding onto it until you get to a part of the fabric that hasn't yet been ironed.  Repeat the ironing rolling process until the full strip of fabric is ironed.

Note:  if the fabric is loose on the wheel, you can pull on the fabric and turn the wheel to tighten it. 

You can store enough binding for a king sized quilt on this wheel!
Extra wheels

Several customers have requested extra wheels to store their binding.
If you already purchased a binding wheel and you want extra wheel parts you can order them in our Spare Parts section of the web site.
Wheel Clamp
​
By customer request we also now offer a Wheel Clamp to hold your Binding Wheel in place while you load it.  
Designed by Purple Hobbies LLC and 3D printed in the USA.